Proxxon LWS Manual Del Usario página 7

Using the unit
IMPORTANT!
Injury hazard!
Do not work without a dust protection mask and
protective goggles. Do not use the unit on materi-
als which contain asbestos.
1. Switch the unit on via the switch 3 (Fig. 1).
NOTE!
Do not press too hard when using the grinder.
Good grinding performance can only be achieved
using the correct and constant rotational speed.
To achieve the best results when roughening, apply
the grinding disc to the grinding surface at an angle
of between 30° and 40° and move evenly back and
forth over the workpiece.
Do not bend the grinding disc into the cutting sur-
face during cutting work.
IMPORTANT!
Do not use the cutting disc for roughening work.
Risk of fracture!
IMPORTANT!
If the unit overheats, switch it off and allow it to
cool.
Maintenance
IMPORTANT!
Disconnect the plug from the mains before
performing any maintenance or cleaning work.
After use
Clean the unit thoroughly, removing all grinding dust
with a brush or a soft cloth. Ensure all ventilation
slots are free from obstruction.
Disposal:
Please do not dispose of the device in domestic wa-
ste! The device contains valuable substances that can
be recycled. If you have any questions about this,
please contact your local waste management enterpri-
se or other corresponding municipal facilities.
EC Declaration of Conformity
Name and address of the manufacturer:
PROXXON S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: LWS
Article No.: 28547
In sole responsibility, we declare that this product
conforms to the following directives and normative
documents:
EU EMC Directive 2004/108/EC
DIN EN 55014-1 / 09.2003
DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 09.2005
DIN EN 61000-3-3 / 06 2006
EU Machinery Directive 2006/42/EC
DIN EN 60745-1 / 06.2007
Date: 13.07.2009
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
GB
- 7 -