Cpu Activation; Anchor Activation; Diagnostics - GIMOTO V-RACE RR HYBRID Manual Del Usuario

4.3 CPU activation

The system has a safety activation mechanism operated by a switch, once you turn it on, the
system optimizes power consumption according to actual usage. It is recommended to turn it
off when not in use in order to preserve battery life.
■ Turn on the switch to activate the CPU (fig_4.9).

4.3.1 ANCHOR activation

The ANCHOR system has no on/off switch. Once the system is fully charged, it remains active
for 25-30 hours maximum. Control the charge level via the diagnostics APP.
NOTE:
the system's LED lights stay all throughout the charging process.
We recommend CHARGING the system shortly prior to its actual use; alternatively,
connect it permanently to the bike's battery, under lock.

4.4 Diagnostics

After activating the CPU, you can check the proper functioning of the system via LED interface
(fig_4.10).
LED color
Solid Red
Solid Yellow
Flashing Light Blue
(3 flashes)
OR
Flashing White
(3 flashes)
Flashing Yellow
(3 flashes)
OR
Flashing Purple
(3 flashes)
Flashing Ice Blue
(3 flashes)
Flashing Yellow
Flashing Green
Flashing Blue
(3 flashes)
Solid Purple
Virtual cable
Meaning
Recharge required
System initialization in progress
ROAD mode set
RACETRACK mode set
Initialization complete /
Anchor not detected
Connection failure /
defective tag
Anchor detected
Waiting for GPS signal
GPS signal hooked, system
ready for use
System Armed, the arming
speed has been reached and
the system becomes operational
System activated
Action (if required)
Recharge the CPU battery via
USB. Do not start a driving
session under these conditions
The virtual cable system doesn't
work, bring the system to a ser-
vice provider
Pyrotechnic charge and cartridge
replacement required. Then, con-
firm CPU RESET in the APP
SETTINGS
EN
25