Setting Up The Display; Sd-Sdi Picture Menu; S-Video Picture Menu; Composite Picture Menu - NDS EndoVue Plus Manual Del Usuario

Setting Up the Display

SDI Picture Menu

S-Video Picture Menu

Composite Picture Menu

Horizontal Position
Moves the image to the left or right. Press fi or fl to horizontally center the image.
Vertical Position
Moves the image up or down. Press fi or fl to vertically center the image.
Sharpness
Press fi or fl to adjust the sharpness (focus) of the displayed image.
Overscan (Video)
This parameter is enabled when the input is video (camera) data.
0 = The image is displayed at a size that fills the screen without losing any video information. The image
presented to the display may include black bars top and bottom or left and right.
1, 2, 3, 4, 5 or 6 = The image is linearly enlarged, while remaining centered, in incremental steps. As the
image becomes larger video information will be lost from the top and bottom and / or left and right.
Select using fi or fl buttons.
Video Format
Auto = Automatically sets the unit to the format of the connected video source. NTSC = Sets the unit to
accept NTSC video. PAL = Sets the unit to accept PAL video. Select using fi or fl buttons.
6