SAFETY INFORMATION
6
Warning: This product is not designed for use in, and should not be used for,
domestic or medical applications. This product doesn't guarantee a safe
power source disconnection, only functional switching of power is
performed.
The product contains no serviceable parts and no internal adjustments are
required. no attempt must be made to repair this product. Faulty units must
be returned to the supplier for repair. Improper use, disassembling or
product modification causes warranty loss.
•
Fuses Info; 2 x anti-surge Ceramic Fuse 5a 5x20mm // 1 x Internal PsU
mains Fuse (2a 5x20mm Time Delay) // 1x Internal PsU output Fuse
(0.315a 5x20mm)
•
This product is designed for indoor use only, do not use in a wet,
chemically aggressive or dusty environment
•
Do not use alcohol, acetone and other similar solvents to clean it, simply
wipe the outside of the product with a soft wet cloth (Do not use any of
the above to clean inside the casing of product where the electrical
components are)
•
This product contains no serviceable parts and no internal adjustments
are required
•
This device uses wireless signal transmissions, please keep it away from
electronic equipment that may be likely to cause interference
•
Keep this device and it's accessories out of reach of children
•
This device is supplied with three safety approved cables, if you
choose not to use these cables we cannot be held responsible for any
related issues
•
Do not attempt to programme it except as instructed , if there is a
problem please try and resolve it through the general troubleshooting
section, if the problem cannot be solved please contact your supplier
Disclaimer Notice
•
We operate a policy of continuous development and therefore we
reserve the right to make changes and improvements to the design,
functionality or any part of this device as described in this document
without prior notice
•
For the latest information please contact your supplier
•
We cannot be held responsible in any way should this product be used
other than for the intended purpose
•
We accept no responsibility for any loss of income or damages whether
consequential or indirectly and however caused due to the use of this device
Additional Options
estateView software
For control of multiple units we have developed a dedicated management
software solution called 'estateView' . estateView can control many devices
from one central place, you can set up/initialise one or many devices at a time,
all the numerical commands are embedded within the software so you can
reboot devices with the click of a mouse, as well as the standard sMs alerts
estateView can send email alerts for power outages, you can customise fields
easily to allow for all important information to be held in one central place to
save switching between systems and it keeps all power loss and rebooting
records for each device in one central place.
For more details on how estateView can help control your Powertxt Duo®
devices visit our website www.tekview-solutions.com or email info@tekview-
solutions.com for a software demonstration or copy of the product sheet.
additional Cables and Other Options
Please check with your supplier for the latest updated list.
symbols
Hazardous
Ce Certified
Voltage
Inside
7
recycle
Weee
Where
Directive
Possible