Sequential Charging - LG PowerTank Manual Del Usuario

Sequential Charging*

1. Connect the charger adapter to the USB cable, and plug it into a wall
outlet. Connect the cable to the PowerTank 10,000 mAh Portable
Charger & Power Pack's Micro USB input port (3).
2. Using the USB cable, connect the PowerTank 10,000 mAh Portable
Charger & Power Pack's USB output port (1, Port A or B) to your
mobile device's USB port.
Depending on the mobile device, the charging process may not stop
even though the battery is fully (100%) charged (charging times
may vary depending on the mobile device's manufacturer).
3. W hen your mobile device is finished charging, remove the USB cable
connecting it to the PowerTank 10,000 mAh Portable Charger &
Power Pack.
* During sequential charging, the PowerTank 10,000 mAh Portable
Charger & Power Pack will be simultaneously charged while charging
the mobile device(s).
, NOTE
• During sequential charging, the charging current will be limited; therefore,
charging may take longer than usual.
• It is recommended that you use the charger adapter plugged into a wall
outlet during sequential charging. Sequential charging via USB port to PC
may not charge.
• If the charger adapter is disconnected during sequential charging of the
PowerTank 10,000 mAh Portable Charger & Power Pack and a mobile
device, the mobile device will be charged via the PowerTank 10,000 mAh
Portable Charger & Power Pack.
6