English
Owner´s manual
•
This equipment must be grounded.
EIn case of malfunction, the ground connector exerts the least electrical resistance, reducing the risk of
electrocution to the user. The AC power cord must be connected to an appropriate power outlet and must
comply with all national regulations and regulations related to installation and grounding. The operating
voltage must be the national power source applied by regulations. If you are not sure whether the outlet
is properly grounded, have it checked by a qualified electrician or service technician. Do not make any
changes to the plug of the device. If a non-coincident connector is mounted in the unit, leave a suitable
plug from a qualified electrician. Do not use this device with adapter plugs.
Use of extension cables
Use only a 3-wire extension cord, with grounded plugs. Use only a designer extension cord for outdoor
use and adjust it with the socket. These extension cables are as follows: marked as suitable for outdoor
use, when not in use, do not leave it outdoors, use an extension cord with the rated voltage and the
appropriate nominal current for the appliance. Do not use damaged extension cords. Check the extension
cords before operation and replace them if they are damaged. Use the extension cords only for the
intended purpose. Do not use the cord, especially when you are pulling the plug from the AC outlet.
Pull the cable away from the heat and do not over the sharp edge, always disconnect the extension
cord from the outlet before removing the device from the extension cord connector. Damaged power
cords or a special cable with connector can only be replaced by the manufacturer or customer service
representatives.
WARNING
• To reduce the risk of electrocution, keep all connections dry, avoiding direct contact with the ground. Do
not touch the plug with wet hands.
• Do not use the appliance if a power cord or important parts of it are damaged, for example: safety
devices, high pressure hoses, trigger gun.
• If an extension cord is used, the plug and plug must be of watertight construction.
• WARNING: Unsuitable extension cords can be dangerous.
• Remove the plug from the socket during cleaning or maintenance and when replacing parts or
converting the machine to another function
The plug must be removed from the socket-outlet before cleaning or maintaining the
appliance.
Do not vacuum any sharp-edged, hot or incandescent materials.
The appliance should not be exposed to heat.
Unplug the appliance form the mains supply socket after use and before every cleaning. Pull the plug, not
the mains cable, in order to disconnect the appliance from the mains.
Do not put any object into openings. Do not use with any opening blocked. Keep free of dust, lint, hair
etc.
Do not use the vacuum cleaner without dust container or dust filter in place.
Do not vacuum any flour, cement etc, in order to avoid the overloads.
The appliance should only be cleaned with a dry or damp cloth; it should never immersed in water. Do
not use any solvents for cleaning.
This appliance is intended for domestic use only and not for commercial applications.
Avoid the nozzle or brush touching the surface of the furniture.
Do not use the mains wire to carry the appliance. Do not pull the mains wire over sharp edges.
29