Audio; Schedule - Sharp MULTEOS M40 Manual Del Usuario

H RESOLUTION
INPUT DVI, VGA, RGB/HV only
V RESOLUTION
INPUT DVI, VGA, RGB/HV only
ZOOM MODE
BASE ZOOM
ZOOM
H ZOOM
V ZOOM
H POS
V POS
INPUT RESOLUTION
INPUT VGA, RGB/HV only
AUTO
1024x768
1280x768
1360x768
1366x768
1440x1050
1680x1050
ADJUST RESET

AUDIO*

BALANCE
TREBLE
BASS
PIP AUDIO
AUDIO RESET

SCHEDULE

OFF TIMER
SCHEDULE SETTING
SCHEDULE LIST
DATE & TIME
YEAR
MONTH
DAY
*: The product you purchased may not have this feature.
01_English
Adjusts the horizontal size of the image.
Adjusts the vertical size of the image.
Select the aspect ratio of the screen image.
16:9* For input sources that have a 16:9 aspect ratio.
14:9* For input sources that have a 14:9 aspect ratio.
DYNAMIC* Expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.
OFF Selecting "OFF" will display the image in a 1 by 1 pixel format. (If the input resolution is
higher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen.)
CUSTOM Displays an image as large as possible without changing the aspect ration.
Maintains the aspect ratio while zooming.
Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.
Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.
Horizontal position. Can be adjusted for each BASE ZOOM setting.
Vertical position. Can be adjusted for each BASE ZOOM setting.
If there is a problem with signal detection, this function forces the monitor to display the
signal at the desired resolution.
If no problem is detected, the only available option will be "AUTO".
Resets the following settings within the ADJUST menu back to factory setting:
AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION,
V RESOLUTION, ZOOM MODE, INPUT RESOLUTION.
Selects source of PIP audio.
Resets "AUDIO" options back to factory settings.
Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
Creates a working schedule for the monitor to use.
List of schedules.
Sets the date, time, and daylight saving region. Date & time must be set in order for the
"SCHEDULE" function to operate.
25
English-25
18/12/06, 8:52 AM