Operation with detergent
Detergent can only be added when the device is operated in low
pressure mode.
DANGER
When using detergents, the material data safety sheet issued by the
detergent manufacturer must be adhered, especially the instructions
regarding personal protective equipment.
Remove the cap of the clean detergent bottle. Gently pull the onboard
detergent tank out of its storage position.
Fill the tank with detergent designed specifically for use with pressure
washers.
Push the detergent bottle with the opening pointing downwards into the
connection for the hose clean detergent.
Recommended cleaning method
• Spray the detergent sparingly on the dry surface and allow it to
react, but not to dry.
• Spray off loosened dirt with the high pressure Met.
After operation with detergent
• Remove the hose clean detergent bottle from the intake and
close it with the lid.
• For storage, put the detergent bottle into the retainer with the cap
pointing up.
Interrupting operation
• Release the lever of the trigger gun.
• Lock the lever of the trigger gun.
• Put the trigger gun with the spray lance into the parking position.
• During longer breaks(more than 5 minutes), also turn the
appliance off using the "OFF/ON" switch.
15