Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• English
Pump Start Up
The Lacronite ECO-V Variable Speed Pump is designed to operate on speed setting High
when the pump is fi rst turned on. This ensures the pump is properly primed and adequate fl ow
through the pool's fi ltration and re-circulation system. The high speed start up will operate for 3
minutes then switch to the pre-selected speed setting.
During the initial start up period the light on the pre-selected speed setting button will start
fl ashing. If the pump had a pre-selected speed setting less than 1900 RPM the ECO (Low) light
will be fl ashing.
Note: The above instructions are only a guide; each pool has individual water pressure and fl ow
requirements. Lacronite ECO-V Variable Speed Pump has to be sized appropriately by a pool
professional to ensure effi cient operation of your pool.
The following charts provide the water fl ow characteristics of the Lacronite ECO-V Variable
Speed Pump at 4, 6, 8 & 10 metre of head loss with minimum pump operating hours
18
16
14
12
10
8
6
4
2
0
0
Lacronite ECO-V 100
ECO-V
5
1
0
Flow (m
/hr)
3
MED
ECO
1
5
HIGH
2
0
Tabla de contenido
