Pump Speed
Head Loss (m)
m
/hr
3
Pool Size (litres)
25,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
Note: This chart is calculated using turnover of pool size (litres) once per day.
Note: During normal operation ensure your pool has sufficient circulation of water to ensure
effective turnover of the pool. If there is insufficient flow of water from the pool's returns,
increase the pump's operating speed till there is sufficient water flow.
Note: The Lacronite ECO-V Variable Speed Pump will provide a flow rate of 120 Litres per
minute with a 2.5 m head loss at 1475 RPM in ECO (Low). This has been tested in accordance
with Australian Standards (AS5102.2).
The Lacronite ECO-V Variable Speed Pump is equipped with the latest motor
that utilises electronic PCB's & microchips for pump control & protection.
When the pump is turned off, it will be necessary to delay restarting the pump
for a minimum of 10 seconds. This will ensure the pump electronics has totally
reset.
However, in some situations electronically controlled Chlorinators may provide
a small residual of power to the Lacronite ECO-V Variable Speed Pump
preventing the resetting of the pumps electronics. In this case the power to the
Chlorinator and pump must be totally disconnected to enable the electronics
to reset.
It is recommended that you contact the supplier or manufacturer of your
chlorinator to gain any further assistance or advice with this issue.
Minimum Pump Operating Hours
ECO-V 1475RPM
ECO
4m
6m
4.0
7
6.3
3.6
7.6
4.3
10.1
5.7
12.6
7.1
15.1
8.6
17.7
10.0
20.2
11.4
22.7
12.9
25.2
14.3
Lacronite ECO-V Multi Speed Pump
Medium
6m
8m
10m
12
10
8
2.0
2.4
3.1
2.4
2.9
3.7
3.3
3.9
4.9
4.1
4.8
6.2
4.9
5.8
7.4
5.7
6.8
8.6
6.5
7.7
9.9
7.3
8.7
11.1
8.2
9.6
12.3
I pg 04
High
6m
8m
10m
17
15
14
1.5
1.7
1.8
1.8
2.0
2.2
2.4
2.7
3.0
3.0
3.3
3.7
3.6
4.0
4.4
4.2
4.7
5.2
4.8
5.4
5.9
5.4
6.0
6.7
6.1
6.7
7.4