Pump Start Up - Waterco LACRONITE ECO Serie Instruction

Ultra Quiet
Lacronite ECO operates most economically and with the lowest noise level at its low speed
setting. Its low speed setting significantly reduces the pump's vibration, motor noise and water
turbulence to an ultra low 64.3 decibels (dBA).
Off-Peak Operation
Its low noise levels enable it to be operated at times that are not allowable for conventional
pool pumps. A Lacronite ECO allows you to take advantage of off-peak electrical tariff periods,
without upsetting your neighbours.

Pump Start Up

The Lacronite ECO Multi Speed Pump is designed to operate on speed setting High when the
pump is first turned on. This ensures the pump is properly primed and adequate flow through
the pool's filtration and re-circulation system. The high speed start up will operate for 2 minutes
then switch to the pre-selected speed setting.
During the initial start up period the light on the pre-selected speed setting button will start
flashing.
Please Note: The above instructions are only a guide; each pool has individual water pressure
and flow requirements. Lacronite ECO Multi Speed Pump has to be sized appropriately by a
pool professional to ensure efficient operation of your pool.
The following charts provide the water flow characteristics of the Lacronite ECO Multi Speed
Pump at 6, 8 & 10 metre of head loss with minimum pump operating hours.
18
16
14
12
10
8
6
4
2
0
Lacronite ECO 100
0 5
ECO
10
Flow (m /hr)
3
Lacronite ECO Multi Speed Pump
HIGH
MED
15 20
I pg 02