12. Install Fixed Panels
NOTE: Perform the procedures below from the inside of the shower.
NOTE: The panel without the magnet is the pivot side fixed panel. The panel with the magnet is the
strike side fixed panel.
Place the pivot side fixed panel on the bottom "C" frame and slide the fixed panel into the wall
jamb.
Allow the panel to rest on the bottom "C" frame.
Secure the wall jamb to the bottom "C" frame with five #8-18 x 3/8" screws.
Repeat this procedure with the strike (magnet) side fixed panel.
1034047-2-G
Wall Jamb
#8-18 x 3/8"
Screw
Bottom "C"
Frame
Pivot Side
Fixed Panel
16
Sterling