Kohler Sterling NI3100 Serie Manual Del Usuario página 11

6. Install Corner Panel
CAUTION: Risk of property damage. Select panel adhesive recommended for use with polystyrene
surfaces. This will ensure that the corner panel will properly adhere to the walls to create a
watertight seal.
Apply panel adhesive to all four edges of the dull side of the corner panel. Ensure the panel
adhesive is 1/4" (6 mm) thick and at least 1/2" (1.3 cm) in from the edges of the panel.
With the panel adhesive facing in toward the corner where the two side walls meet, position the
corner panel.
Place the bottom edge of the corner panel flush against the ledge of the shower base.
Firmly press the corner panel against the wall to transfer the panel adhesive.
Using a soft cloth, apply pressure and rub the entire corner panel surface. This will ensure a secure
bond.
Sterling
Apply panel adhesive.
Apply panel adhesive.
11
1/2"
(1.3 cm)
Apply
panel
adhesive.
1034047-2-G