3. Ceiling Fan Assembly
Installation of Switch Housing
Assembly for Manual Control
3.6
Remove and retain the Three #8-32 x 12mm Flat Head
Screws from the Switch Housing Plate .
Engage the Switch Housing Assembly Connector to the
Motor Connector (Figure 6) .
The Two Connectors are Keyed and Color-coded and
must be Mated Correctly (color-to-color) before they can
be Engaged .
Make sure the Connector Latch closes properly .
Installation of Switch Housing
Assembly for Manual Control
3.7
Carefully tuck all Wires and Connectors under the
Switch Housing Assembly .
Secure the Switch Housing Assembly by reinstalling
the Three #8-32 x 12mm Flat Head Screws (previously
removed) (Figure 7) .
Proceed to Ceiling Fan Assembly, Step 3 .9 .
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the switch housing assembly and the switch
housing plate.
Installation of Switch Housing for
Accessory Control
If Luminance Brands Accessory RF Control is to be
used, install the accessory control switch housing.
3.8
Remove and retain the Three #8-32 x 12mm Flat Head
Screws from the Switch Housing Plate .
Position the Switch Housing on the SwitchHousing
Adapter and Align the Holes in the Switch Housing with
the Holes in the Adapter .
Secure the Switch Housing by reinstalling the Three
#8-32 x 12mm Flat Head Screws (previously removed)
(Figure 8) .
Proceed to Ceiling Fan Assembly, Step 3 .9 .
(Continued)
Figure 6
SWITCH
HOUSING
ASSEMBLY
REINSTALL THE #8-32 x 12mm
FLAT HEAD SCREWS (3)
Figure 7
A spare #8-32 x 12mm Flat Head Screw is supplied in
the loose parts bag, if required .
SWITCH
HOUSING
#8-32 x 12mm FLAT
Figure 8
HEAD SCREWS (3)
A spare #8-32 x 12mm Flat Head Screw is supplied in
the loose parts bag, if required .
Please contact 1-800-777-4440 for further assistance
7
PULL CHAIN SWITCH
MOTOR
CONNECTOR
SWITCH HOUSING
ASSEMBLY
CONNECTOR
SWITCH HOUSING
ASSEMBLY
SWITCH HOUSING
ADAPTER
luminancebrands.com
U.L. Model No.: CF784-3