WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the fan
control.
10.1
Check the operation of the Ceiling Fan by sliding the
Ceiling Fan Speed Knob through the Four positions
(Figure 27) .
Slide the Ceiling Fan Speed Knob to the desired
airflow:
H = High Speed
M2 = Medium High Speed
M1 = Medium Low Speed
L = Low Speed
To Turn the Fan OFF, Slide the Ceiling Fan Speed
Knob down to the OFF position (Figure 27) .
10.2
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise, as
you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch (located on side of the Center
Switch Assembly) to the opposite position, and turn the
Ceiling Fan on again (Figure 28) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
Reverse Switch Information
Season
Blade Rotation Direction
Summer
Counter-Clockwise
Winter
Clockwise
10. Using Your Ceiling Fan
FAN SPEEDS
OFF
POSITION
CEILING FAN
SPEED KNOB
Figure 27
Figure 28
17
L
M1
M2
H
OFF
REVERSE SWITCH
REVERSING SWITCH
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF320