Important Safety Instructions; Summary Of Operation; Description; Kit Contents - BriskHeat IBC Tote Manual De Instrucciones

IMPORTANT SAFETY INSTRUCTIONS

DANGER
A person who has not read and
understood all operating Instructions
is not qualified to operate this
product.
DANGER

Do not immerse the controller in liquid.

Keep volatile or combustible material away from heater
when in use.

Use heater only in approved locations.

Keep sharp metal objects away from heater cord.
Failure to observe these warnings may result in electric shock,
risk of fire, and personal injury.
WARNING
End-User Must Comply to the Following:

Only qualified personnel are allowed to connect the
electrical wiring.

Disconnect all supply power at the source before making
any power connections.

All electrical wiring must follow local electrical codes.

The installer must be qualified for this work.

The end-user is responsible for providing a suitable
disconnecting device.

The end-user is responsible for providing a suitable
electrical protection device. It is highly recommended that
a ground fault circuit breaker is used.
Failure to observe these warnings may result in personal injury
or damage to the heater.
®
© BriskHeat Corporation. All rights reserved
IBC/Tote Tank Immersion
Heater
Agency Approvals
240 V Unit Only
CAUTION

Never handle the heater while it is in operation; always
disconnect the heater from the power source and allow to
cool prior to handling.

Inspect heater before use.

If spillage of foreign matter onto heater occurs,
disconnect from power source and clean after heater is
allowed to cool.

Never operate heater without an appropriate heat sink
(material being heated is considered to be a heat sink).

Do not repair damaged or faulty heaters.

Do not crush or apply severe physical stress on heater or
cord assembly.

Disconnect heater when not in use.

Use heater only for its intended applications.
Failure to observe these warnings may result in personal injury
or damage to the heater.
.
3
WARNING
!
Read and understand this entire manual before
operating this heating device.

SUMMARY OF OPERATION

1. Easy installation with a universal-fit design.
2. Direct immersion of the heater results in high thermal efficiency.
3. Features clear digital indicators showing current temperature, alarm, and heating status, and is IP55
rated.
4. Ready to use, with grounded power cord and plug (120 VAC) or bare wire leads (240 VAC),
delivering 1500 Watts.

DESCRIPTION

The BriskHeat IBC/Tote Tank Heater is an integrated heater and thermostat designed to regulate the temperature of a
tote tank and its contents. It features an immersion heater with a digital thermostat, and can be paired with a tote tank
insulated jacket for maximum efficiency. The thermostat can be set to a maximum of 167°F (75°C), and the controller
features a high-limit visual alarm set at 180°F (82°C).
Each IBC/Tote Tank Heater features a 10 ft (3 meter) power cord.

KIT CONTENTS

 Immersion heater

Plastic cap
Optional items, available but not supplied
 IBC/Tote Tank top surface insulator

IBC/Tote Tank wrap around (sides) insulator
WARNING
Fire and shock hazard. This product is an electrical device that must be installed correctly to ensure proper
operation and to prevent shock or fire. Read these important warnings and carefully follow all the installation
instructions.
 If heater's power cord is damaged, unplug the heater and remove from service immediately.

Keep these instructions for future reference.

De-energize all power circuits before installation or servicing.
®
© BriskHeat Corporation. All rights reserved
IBC/Tote Tank Immersion
Heater
.
4