Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING
THE DRYER
O
LOAD THE DRYER
Load the dryer with the wet laundry
from the washer, if the load is
extra large, you may need to divide
it into smaller loads for proper
performance
and fabric care.
O
CLEAN THE LINT FILTER
If the tint filter has not already
been cleaned, tilt out the filter and
remove the tint from the last toad. This will help ensure the fastest
and most emcient
drying
performance.
POWER
O
URN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs will
illuminate
and a chime will sound.
O
SELECT A CYCLE
Turn the cycle selector
knob in either direction
until the LED for the
desired cycle is illuminated.
The preset temperature,
dry level, and
option settings for that cycle will display.
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed,
if
desired.
NOTE: Not all options or modifiers
are available
with all cycles.
Temperature
can only be adjusted on Timed Dry cycles; Dry Level is
only available
on Auto Dry cycles. A different
chime will sound and
the LED will not illuminate
if the selection is not allowed.
Less Time
I
Touch Up
1
Co_,*rol Lock
O
SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons,
NOTE: Not all options or modifiers
are available
with all cycles.
A different
chime will sound and the LED will not come on if the
selection is not allowed.
START/PAUSE
O
O
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be
paused at any time by opening the door or by pressing the START/
PAUSE button. If the cycle is not restarted within four minutes of being
paused, the dryer will shut off and the settings will be lost.
END OF CYCLE
When the cycle is finished, a chime will sound. Immediately
remove
your clothing
from the dryer to reduce wrinkling.
If WRINKLE
GUARD is selected, the dryer will tumble briefly every few minutes
to help prevent wrinkles from setting in the clothes.
19
Tabla de contenido
