Maintenance; Components; Ordering Information; Spare Parts - bioSan Assistboy Manual Del Usuario

In order to prolong the life span of a rechargeable battery the following rules should be fol-
lowed:
1. Before the pipette controller is activated for the first time the battery should be charged.
2. Assistboy should not be left uncharged for a longer period of time.
3. If the Assistboy is left unused charge cycles should be performed every six months.

9 - MAINTENANCE

Cleaning
The Assistboy does not require any maintenance. The external parts of the pipette con-
troller may be cleaned with a swab moistened with isopropyl alcohol.
The nosepiece and the pipette holder may be autoclaved at 121°C for 20 mi nutes. The filters
included in the set may be sterilised by autoclaving at 121°C for not more than 15 minutes.
Ultra violet (UV) sterilization
The outer body of the pipette controller is UV resistant which was confirmed by our tests.
The recommended distance from the radiation source to exposed element should be not
less than 50 cm. Prolonged and very intense UV exposure can cause de-coloration of
pipette controller parts, without affecting its performance.
Storage
The Assistboy shall be stored in a dry place. The allowable storage temperature: -20°C
to +50°C.
During breaks in the work the pipette controller shall be placed in the wall hanger included
with the pipette controller.
The hanger may be fitted on a wall with a screw or stuck with the adhesive tape attached to
the hanger. The surface for the hanger should be smooth, clean and degreased. After
cleaning the surface, it should be wiped with isopropyl alcohol and left to dry. Before stick-
ing the hanger remove the protective film from the tapes attached to the hanger. The hang-
er should be stuck by pressing it hard to the surface and by leaving it attached without any
load for a period of 24 hours.
Note:
Do not store the pipette controller with a filled pipette.

10 - COMPONENTS

The Assistboy set is supplied with the following components:
• Charger
• Wall hanger
• Charging stand
• Membrane filter 0.2 μm
• Instruction manual
7

11 - ORDERING INFORMATION

The Assistboy comes with a charger and a universal set of adapters in different versions:
EU, US, UK and Australia. Choose your country used adapter and connect to the housing.
To mount the adapter, it should be inserted into the slots of the housing in the direction of
the arrow (fig. 6.1), until you hear a click engagement.
To remove or change the adapter, simply press the "PUSH" button in the direction of the
arrow (fig. 6.2), then holding the button down, remove the adapter in the direction of the
arrow (fig. 6.3).
Catalogue no. BS-010521

12 - SPARE PARTS

Item Part name
F Nosepiece
G Pipette holder
H Membrane filter 0.2 μm
Membrane filter 0.45 μm
K Connector gasket
L Charger 9V: EU, US, UK, AU Plug
M Charging stand

13 - PRODUCT DISPOSAL

According to Directive 2012/19/EU of the European Parliament and of the Council of
4 July 2012 on waste electrical and electronic equipment, pipette controller Assistboy is
marked by the crossed-out wheeled bin. It means that the electric equipment and batteries
must not be disposed of with domestic waste.
Consequently, the buyer shall follow the instructions for reuse and recycling of waste elec-
tronic and electrical equipment (WEEE).
The crossed out wheeled bin symbol is printed in the product instruction
manual and on the packaging to indicate that, in accordance with the require-
ments of Directive 2006/66/EC of 6th September 2006 on batteries and accu-
mulators and waste batteries and accumulators, batteries must be disposed
of accordance with national regulations.
All rights reserved. Product described in this manual is subject to availability and technical modification. Errors excepted.
BIOSAN SIA reserves the right to improve, enhance or otherwise modify its products without prior notification.
© 2017 BIOSAN SIA
ENGLISH
Number of
Cat. nr.
pie ces in pack
BS-010521-S01 1
BS-010521-S02 1
BS-010521-S03 1
BS-010521-S04 1
BS-010521-S05 1
BS-010521-S06 1
BS-010521-S07 1
8