Description Of Connections; Typical Installation - Roger Technology H70/200AC Instrucciones Y Advertencias Para El Instalador

6

Description of connections

Figures 1-2-3-4 show connection diagrams.
6.1

Typical installation

1
8
9
5
It is the installer's responsibility to verify the adequacy of the cables in relation to the devices used in the
installation and their technical characteristics.
1 Power supply
2 Motor 1
3 Motor 2
4 Photocell - Receiver F2ES/F2S
5 Photocell - Transmitter F2ES/F2S
Key selector R85/60
Keypad H85/TTD - H85/TDS
(connecting to H85/DEC - H85/DEC2)
6
H85/DEC - H85/DEC2
(connecting to control unit)
LED Flashing light R92/LED230 - FIFTHY/230
Power supply 230Vac (40 W max)
7
Antenna
Gate open indicator
8
Power supply 24 Vdc (2 W max)
Courtesy light
9
Power supply 230 Vac (100 W max)
Encoder connection (if present)
SUGGESTIONS: with existing installations, we recommend checking the cross section of the cables and that
the cables themselves are in good condition.
50
7
6
4
2
Recommended cable
H07RN-F 3x1,5 mm
insulated cable (max 15 m)
Cable 4x1,5 mm
Cable 4x1,5 mm
Cable 4x0,5 mm
Cable 2x0,5 mm
Cable 3x0,5 mm
Cable 2x0,5 mm
Cable 4x0,5 mm
The number of conductors increases when using more than one output
contact on H85/DEC - H85/DEC2
Cable 2x1 mm
Cable tipo RG58 (max 10 m)
Cable 2x0,5 mm
Cable 2x1 mm
Cable 3x0,5 mm
3
4
double H07RN-F 3x2,5 mm
2
insulated cable (max 30 m)
(max 20 m)
2
2 (max 20 m)
(max 20 m)
2
(max 20 m)
2
(max 20 m)
2
(max 30 m)
2
(max 20 m)
2
(max 10 m)
2
(max 20 m)
2
(max 20 m)
2
(max 30 m)
2
5
double
2