Before Using Your Appliance For The First Time - Krups GNA841 Manual De Instrucciones

APPLIANCES WITHOUT FITTED PLUG
FITTING A PLUG - IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
BLUE : NEUTRAL
BROWN :†LIVE
But the colours may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter ëNí or coloured black. The
wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter ëLí or coloured red.
This appliance is manufactured to conform to
the Low Voltage Electrical Equipment (Safety)
Regulations 1989 and is designed to comply
with BS 3456.†It complies with the
requirements of the EEC Directive (89/336/
EEC).
Any connection error will render the
guarantee null and void.
• The power cable must never be near or in
contact with the hot parts of your appliance,
near a source of heat or on a sharp corner.
• Do not place the appliance, the power cable
or the plug in water or any other liquid.
• If the power cable and plug are damaged,
do not use the appliance. To avoid any risk,
always have the parts replaced by an
approved Krups service centre (see «Krups
Service Stations» booklet).
• Unplug your appliance as soon as you have
finished using it and when you are cleaning
it.
• Do not use your appliance if it is not
working correctly or if it has been damaged.
If this happens, you should contact an
approved Krups service centre (see Krups
Service Stations booklet).
• Any action other than cleaning and normal
maintenance by the customer must be
performed by an approved Krups service
centre.
• For your own safety, use only Krups
accessories and spare parts which are
suitable for your appliance.
• All appliances are subject to rigorous quality
controls. Usage tests are carried out on
appliances selected at random, consequently
some may show signs of use.
• This appliance is designed for use under
supervision by the user.
• Never touch the whisks, dough hooks,
the blade of the blender foot or the
drums of the slicer-grater, when the
appliance is working. Do not allow long
hair, scarves, the lead, etc. to hang over
the accessories during operation.
• Unplug the appliance before handling it
in any way (fitting and removal of
accessories)
• Never fit accessories with different functions
at the same time (e.g. dough hooks and
balloon whisk, etc.).
• Please note: the blades of some of the
accessories are sharp. Handle the blades
with care.
Important: Your appliance is fitted with two
outlets (1):
• a front outlet (a) for fitting the accessories
(g, h, i, j, k) (depending on model)
• a rear outlet (b) for fitting accessories (l, m,
n) (depending on model).
Before using your appliance for
the first time
• Clean the various accessories of your
appliance carefully.
Using accessories on the front
outlet
. Whisks and dough hooks
• With the control button (d) in position «0»,
insert the whisks or dough hooks until they
are locked into place. Always insert the
accessory equipped with a toothed crown
into the opening indicated on the appliance
by a crown which is similarly toothed (2).
• Plug in the appliance.
13