Technical Data; Scope Of Delivery; Intended Use; Safety Instructions - Festool MFK 700 EQ Manual De Instrucciones

Modular router MFK 700 EQ
Table of contents
1 Symbols
2

Technical data

3

Scope of delivery

4

Intended use

5

Safety instructions

5.1 General safety instructions
5.2 Machine-related safety instructions
5.3 Emission levels
6 Commissioning
7 Machine settings
7.1 Electronics
7.2 Changing the router table
7.3 Changing the routing tool
7.4 Changing the clamping collet
7.5 Adjusting the routing depth
7.6 Dust extraction
8 Working with the machine
8.1 Machine guidance methods
8.2 Aluminium processing
9 Service and maintenance
10 Accessories, tools
11 Disposal
12 Warranty
13 EU Declaration of Conformity
The specifi ed illustrations can be found at
the beginning an at the end of the operating
instructions. The spare parts list appears at
the end of this operating manual.
1 Symbols
Warning of general danger
Risk of electric shock
Wear a dust mask!
Read the Operating Instructions/
Notes!
Advice or tip
2 Technical data
Power consumption
Rotational speed (no load)
Tool holder
(optional: 6 mm, 1/4"(6.35 mm))
Max. routing tool diameter
Dust extractor connection diameter 27 mm
Weight
Safety
3 Scope of delivery
[1-1] MFK 700 with large surface router
table
[1-2] Side stop with guide rods and fi ne
adjuster
[1-3] Extraction hood for large surface
router table with extractor connector
[1-4] Router table for edge veneer with
feeler roller and extraction hood (only
in SET scope of delivery)
4 Intended use
The MFK 700 EQ is designed for routing
wood, plastic and similar materials.
The user bears the responsibility for damage
and accidents caused by improper use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warn-
ings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for
future reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
- Ensure that the router bit is seated fi rmly
and that it runs perfectly.
- The clamping collet and locking nut must
show no signs of damage.
- Only use tools that meet standard EN
847-1. All Festool routing tools fulfi l these
requirements.
- The maximum rotational speed specifi ed
on the tool must not be exceeded and
12
720 W
10000 - 26000 rpm
8 mm
26 mm/1"
1.9 kg
/II