Tabla de contenido
Idiomas disponibles
Idiomas disponibles
WARN
_ NG:
To reduce the risk of fire, electric shock, or injury to persons, read this entire
manual, including the Important Safety instructions, before operating this dryer.
|
CONTROL
PANEL FEATURES
I
° Small
Load
O
POWER (ON/OFF) BUTTON
Press to turn the dryer ON. Press again to turn the
dryer OFF. Pressing the POWER button during a cycle
will cancel that cycle and any settings will be lost.
CYCLE SELECTOR KNOB
The cycle selector knob is used to select the desired
dry cycle by rotating the knob in either direction until
the desired cycle LED is illuminated. Once the desired
cycle has been selected, the standard presets for that
cycle wiff show in the display. These settings can be
adjusted using the cycle modifier or option buttons
any time before starting the cycle.
O
@
START/PAUSE BUTTON
Press this button to start
the selected
cycle. The
dryer will display the estimated time (AUTO DRY) or
set time (TIMED DRY) remaining and start tumbling.
To pause the cycle at any time, open the dryer door
or press START/PAUSE. To resume the cycle where it
was stopped, press START/PAUSE again.
O
NOTE: If the dryer has been stopped for more than
four minutes, the dryer will turn off automatically
and all settings will be lost.
OPTION
BUTTONS
These buttons allow you to selectcycle options.
Some
of the option buttons have secondary
functions. The controlscan be locked or unlocked by
pressingand holding the CONTROL
LOCI< button
forfive seconds.
CYCLE MODIFIER
BUTTONS
Use these buttons to adjust the settings for the
selected cycle.The settingslightup above the
buttons to show the currentselection. T he default
temperature
setting
cannot
be changed
in AUTO
DRY cycles.
AUTO
DRY cycles are modified
using
the Dry Level button.
TIME AND STATUS DISPLAY
The display shows the estimated time remaining for
auto cycles and actual time for timed cycles. The
status of the cycle is also displayed.
The CHECK
VENT indicator will illuminate if there is a serious
restriction in the exhaust system.
MY CYCLE
If you have a special combination
of settings that
are used frequently, you can save these settings as a
MY CYCLE.
CHECK VENT INDICATOR
(DUCT BLOCKAGE SENSING SYSTEM)
The CHECK VENT duct blockage sensing system
detects and alerts you to blockages in the ductwork
that reduce exhaust flow from the dryer. This light
does not indicate any problems with your dryer.
If this light blinks, it indicates that your home's
exhaust system has a serious restriction, which is not
covered by your dryer's warranty. There are services
available
for cleaning/maintaining
the external
venting. Sears provides this service via Sears Carpet,
Upholstery, and Duct Cleaning. Call 1-800-661-6594
to schedule duct cleaning service from Sears (if it is
available
in your area).
NOTE: To protect your fabrics, not all settingsare allowed in all cycles.
18
Tabla de contenido
