Safety Instructions; Safety Measures - Uponor C-46 Guía Rápida

2 Safety instructions

Warnings used in this manual
The following symbols are used in the manual to indicate special
precautions when installing and operating any Uponor equipment:
WARNING!
Risk of injury. Ignoring warnings can cause injury or damage
components.
CAUTION!
Ignoring cautions can cause malfunctions.

Safety measures

Conform to the following measures when installing and operating any
Uponor equipment:
• Read and follow the instructions in the installation and operation
manual.
• Installation must be performed by a competent person in
accordance with local regulations.
• It is prohibited to make changes or modifications not specified in
this manual.
6
• All power supply must be switched off before starting any wiring
work.
• Do not use water to clean Uponor components.
• Do not expose the Uponor components to flammable vapours or
gases.
• We cannot accept any responsibility for damage or breakdown that
can result from ignoring these instructions!
Power
WARNING!
The Uponor system uses 50 Hz, 230 V AC power. In case of
emergency, immediately disconnect the power.
Technical constraints
CAUTION!
To avoid interference, keep installation/data cables away
from power cables of more than 50 V.
U P O N O R C L I M AT E C O N T R O L L E R C - 4 6 - Q U I C K G U I D E