EMKO EZM-XX50 Serie Manual Del Usuario página 13

: Communication Baud Rate
1200 Baud Rate
2400 Baud Rate
4800 Baud Rate
9600 Baud Rate
19200 Baud Rate
:Communication Stop Bit Selection
1 Stop Bit.
2 Stop Bits.
:Reset and Set Protection (For Accessing from Front Panel)
No Reset and Set protection.
Only Reset button protection is active.
SET1 and SET2 can not be changed.
Full Protection. Reset protection is active, also SET1
and SET2 can not be changed.
SET1 can not be changed.
SET2 can not be changed.
: Frequency / Cycle Coefficient
It can be adjusted from
parameter.
: Multiplication Coefficient
It can be adjusted from
: Program Password
It is used for accessing to the program parameters.
It can be adjusted from
If it is ; there is no password protection while
entering to the program parameters.
When programming
If this parameter is different from " 0" and user wants to access to the
program parameters;
1- If user does not enter the
without entering to operator parameters.
2-
When
in top display and
button without entering password (for observing the parameters):
to .Count value is multiplied with this
to .
to .
button is pressed, will appear on the display.
value correctly ; operation screen will appear
in bottom display,if user presses ENTER
13