Faults; Overview - BADU JET Turbo Pro Traducción De Las Instrucciones Para El Manejo Originales

Faults

7 Faults
NOTICE
The magnet-coupled drive unit is mounted on slide bearings.
When the plain bearing is run dry it creates warmth and both the
plain bearing and pump parts are damaged.
 Ensure that the pump/unit is always filled with the pump
media. This also applies to checking the rotation direction.
7.1

Overview

Problem: Motor does not start
Possible cause
Error protection device has
tripped.
Frequency converter not
connected correctly.
Problem: Piezo button does not light
Possible cause
Cable wired incorrectly.
Sensor defective.
Problem: Radio transmitter does not work
Possible cause
Battery inserted incorrectly or
dead.
Transmitter immersed in water
for too long.
Problem: Fuse in the house distributor trips
Possible cause
Wrong or fast fuse installed.
44 EN
Solution
 Switch the circuit breaker
back on.
 Have it checked by an
electrician.
 Plug the connection
correctly (bayonet catch).
Solution
 Check and set correctly.
 Check and replace if
necessary.
Solution
 Insert battery the right way
round.
Replace battery.

Remove batteries and dry

the transmitter at max.
40 °C.
 Replace batteries if
necessary.
Solution

Check connections.
 Use 16 A slow-blow fuse.
08|2020