INSTALLED UPPER CLAMP ASSEMBLY
INSTALLED UPPER CLAMP ASSEMBLY
UPPER CLAMP ASSEMBLY INSTRUCTIONS
PAGE 7
The upper clamp assembly provides a
secure attachment of the upper end of the
highest ramp section.
To attach the upper clamp assembly:
1. Place the upper clamp assembly
against the edge of the stage or ramp
landing with the top tubular member
firmly against the stage or landing.
2. Using the provided T-handle hex
wrench, tighten the two socket head
cap screws on the top of the clamp
assembly. Firm pressure is needed to
ensure the clamp is solidly attached.
Do not over tighten to prevent damage
to the stage or landing.
3. Disengage the two hitch pins from the
holes in the clamp assembly.