SICO 3 Serie Manual Del Propietário página 18

DISSASSEMBLING THE RAMP
Disassembly of the ramp is basically the
reverse of the assembly procedure, starting
with the guardrails at the bottom end of the
ramp. Enter and exit handles do not need to
be removed. The carriage bolts at the bottom
end of the bottom guardrails just have to be
loosened and can stay with the guardrails.
The locating sleeves between guardrails do
not need to be removed. Loosen the two
setscrews on the handrail U-turn and remove
the U-turn. As each handrail and guardrail is
removed, be sure to install the attachment
hardware to the ramp or platform so that it is
available the next time the ramp is set up.
Put the handrails and guardrails on the
optional caddy.
After the guardrails are removed and stored,
start disassembly of the ramp from the bottom
wedge section. As each ramp and landing
section is disconnected from the rest of the
ramp system, install it onto the optional caddy.
PAGE 18