HAMPTON BAY 91315 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
10
Wrapping the extra wire
NOTE: Follow this step ONLY if you did not cut the extra length off
from the wires coming from the ceiling fan.
□
Gently wrap the excess wire around the mounting bracket.
□
Secure with electrical tape.
11
Mounting the fan
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
□
Align the locking slots of the canopy (C) with the two screws
in the slide-on mounting bracket (A). Push up to engage the
slots, and turn clockwise to lock the canopy (C) in place.
□
Firmly tighten the two mounting screws (FF).
□
Install the remaining two mounting screws (GG) into the holes
in the canopy (C) and tighten firmly.
□
Install the canopy ring (O) by aligning the ring's slots with the
screws in the canopy (C). Rotate the ring counter-clock-
wise to lock it in place.
GG
11
Please contact 1-855-HD-HAMPTON for further assistance.
A
O
C
E
HAMPTONBAY.COM