Husqvarna X-COM R HP310-1, X-COM R HP310-2 Manual De Usuario página 225

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 228
means that you can have different volumes in each
mode.
To stop the product
1. Push and hold the On/Off/Mode button for 3
seconds.
2. An audio message tells you about the status of the
product. Refer to the table below.
Audio message
POWER OFF
To do maintenance on the product
CAUTION: Do not flush or put the product
fully into water.
CAUTION: Spray, liquids or other cleansers
containing solvents and/or alcohol can
reduce the protective capabilities.
1. Clean the product regularly. Use a cloth with water
and mild soap.
Transportation and storage
If you use HP310-2, put the earmuffs in operation
To put the earmuffs in operation
position. Refer to
position on page 2 2 3 .
Make sure that the sealing rings are not
compressed.
Put the product in a dry and clean space with correct
temperature.
Do not put the product in sunlight during storage.
Approved helmets
Use the product with the helmets below only.
Model
Husqvarna Forest helmet Technical, H300
Husqvarna Forest helmet Functional, H200
Husqvarna Arborist helmet Technical, Petzl Alveo
579 - 005 - 05.07.2019
Information
The product is off.
Maintenance
Transportation, storage and disposal
Accessories
Note: If you do not push a function button for 2 hours,
the product goes to sleep mode to save battery. Push a
button in less than 10 seconds to go back to the last
mode.
To stop the product by force
Push and hold the rearward button, forward button,
volume up button and volume down button for 5
seconds.
Do a check of the condition of the sealing rings and
2.
the foam rubber inserts before each use.
Replace the sealing rings and the foam rubber
3.
inserts 1 time each 6 months or more frequently if it
is necessary. Make sure that the bulge on the
sealing ring points down during assembly. Use
original spare parts. Article number: 596 48 94-01.
(Fig. 27)
Note: If the earmuffs are wet on the inner side, let them
dry in parking position.
Charge the battery 1 time each 4 weeks to keep the
quality of the battery.
Put the product in a safe space during
transportation.
Disposal
Obey national regulations.
Use the local recycling system.
Helmet attachment type
number
L= Left: 581 50 74 01
R= Right: 581 50 74 02
1
1
Approved dimensions
S, M, L
S, M, L
S, M, L
225
loading