Warn 87180 Instrucciones De Instalación página 8

12. Install 8mm bolts and flat washers, one under the bolt
head and one under bracket flange – Do not tighten.
13. Install 6mm U-bolts, lock nuts, and flat washers around
front tube and through fairlead mount bracket.
14. Tighten all fasteners in the order shown. Refer to torque
values listed on page 3 for recommended values.
W A R N I N G
IMPACT AND MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to severe injury or death
• Always tighten all nuts and bolts securely, per the installation and
operation. Failure to check all nuts and bolts prior to use can
result in product failure which can lead to vehicle damage and
operator injury or death.
Read installation and operating instructions thoroughly.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
8
Flat Washer
2
3
4
1
87181A0