Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Always take time to fully read and understand the installation and Operations Guide included with this product.
•
Never operate this product if you are under 16 years of age.
•
Never operate this product when under the influence of drugs, alcohol or medications.
•
Always refer to the Installation and Specification Guide, supplied in the winch kit, for all wiring schematics and specific details on how to wire this WARN product to your
vehicle.
This kit is compatible with WARN's line of ATV winches. Winch is sold separately. Please read WARN's Winching Technique guide
and winch installation guide provided with the winch prior to installation and use of this product.
Not all the hardware required to install a winch is included in this mounting kit. Some hardware will be used from Warn Winch
kit.
Before beginning winch installation, allow the engine and exhaust system to cool and disconnect the negative cable from the bat-
tery
• Ratchet
• Torque Wrench
• Sockets: 10mm, 12mm, 13mm, 15mm, 17mm
• Wrenches: 10mm, 12mm, 13mm, 15mm, 17mm
• Screwdrivers: Slotted, Phillips
• Allen Wrenches: 1/8", 5mm
• Sidecutters or Utility knife
• Voltmeter or Test Light
• Electric Tape
6mm bolts - 12 N-m (9 ft-lb)
6mm U-bolts - 7 N-m (5 ft-lb)
8mm bolts - 16 N-m (12 ft-lb)
8mm U-bolts - 13 N-m (10 ft-lb)
10mm bolts - 47 N-m (35 ft-lb)
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
C A U T I O N
MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to minor or moderate injury
Read installation and operating instructions thoroughly.
N O T I C E
EQUIPMENT DAMAGE
Read installation and operating instructions thoroughly.
B E F O R E Y O U B E G I N
T O O L S R E Q U I R E D
T O R Q U E S P E C I F I C A T I O N S
2
87181A0
Tabla de contenido
