Warn 87180 Instrucciones De Instalación página 11

17. The suggested routing for the blue and yellow winch
power cables is shown below. This routing requires
removing the plastic from the right hand side and routing
wires along the same path with the factory vehicle wires.
Use cable ties and tape to secure power cables along
routing.
W A R N I N G
IMPACT AND MOVING PARTS ENTANGLEMENT HAZARD
Failure to observe these instructions could lead to severe injury or death
• Avoid all moving and potentially hot components of ATV when
routing electircal cables. Avoid areas where the wiring could be
pinched when components are reinstalled. Failure to do so can
result in product failure which can lead to vehicle damage and
operator inuury or death.
Read installation and operating instructions thoroughly.
©2011 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
I N S T A L L A T I O N I N S T R U C T I O N S
11 87181A0