Black+Decker MCD900BBD Manual De Uso Y Cuidado página 7

STEAM
1. Place steaming rack in the cooking pot.
2. Add about an inch of water to the bottom but don't let the top of the
rack get submerged.
3. Add ingredients such as fresh vegetables cut to a uniform size to the
cooking pot and cover with glass lid.
4. Plug in the appliance. The default display (----) will flash on the screen.
Click the Steam button once.
5.
6. After Steam is selected the display will show a default time of 30
minutes. (00:30) This display will be flashing as it is not yet the set
time. To adjust the cooking time press the arrows to increase
decrease
7. Once the time is selected or if the default time is selected, press the
Start/Stop button and the unit will beep once. The time (all digits and
colon) will read solid (not flashing). The unit is now warming up.
8. When the temperature of the unit reaches 212°F the time on the display
will begin to count down. The only item flashing will be the colon
between the 2nd and 3rd digit. The unit will beep twice to signal that
the steaming temperature has been reached.
NOTE: Keep an eye on fresh vegetables and don't overcook. Aim for brightly
colored and slightly softened but not limp. Refer to your recipe for precise times.
9. When the cooking cycle ends the unit will beep three times, turn the
power off, and return to the default display of flashing dashes (----).
RICE
1. Rinse your rice in water and strain with a wire strainer before cooking.
This will make it less likely that the water will boil or froth over the top.
2. Add rice (or other grain) and water (or broth) to the cooking pot and
cover with glass lid.
3. Plug in the appliance. The default display (----) will flash on the screen.
Click the Rice button once. The display will turn solid. (----)
4.
5. Press Start/Stop button. The unit will beep once. The display will cycle
through dashes. (- . . . ), (. - . .), (. . - .), (. . . -). This will continue to run
through the entire cooking cycle.
NOTE: Keep the lid closed until the end of the cooking cycle to ensure that
the heat stays in and the rice gets cooked.
6. After the cooking cycle is complete the unit will beep three times and
automatically switch to Keep Warm. The display will start counting up
from zero to 4 hours (00:00 to 04:00).
7. When the timer reaches 4 hours of being on Keep Warm, the unit will turn
the power off and return to the default display of flashing dashes (----).
.
or
7