Rola Adventure System Manual Del Usuario página 8

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Please read all instructions carefully before assembly, installation and/or use of this product.
•To use Tilt-Up feature, remove bail/lock pins and tilt Cargo Tray into the up position and install both
bail/lock pins into the holes.
Note: Do not drive with the Cargo Tray in the tilted up position. This feature is to be used only when the
vehicle is parked and the unit is not in use.
•Cargo tray and bike rack accessory may be tilted up when not in use. Make sure Bike Rack System is fully
secure before tilting up toward your vehicle. (Clearance for tilting may not be available on all vehicles.)
WARNING: Both bail/lock pins must be used to secure support brackets in tilted up or down positions.
Latch Closed
•To install Bumper Pack to Cargo Tray, lift Bumper Pack up and over tray. Rotate the Bumper Pack down
toward the lights so the two connector pins properly engage the tie-down slots in cargo tray as shown above.
•Seat the Bumper Pack into the Cargo Tray.
•Latch and lock the Cargo Tray/Bumper Pack latches before every use.
Note: The latch keys are taped to the inside of the lid of Bumper Pack.
Cequent Consumer Products, Inc.
Solon, OH 44139 USA
Cequent Help Hotline: 1-800-234-6992
Product Name:
General Operating Instructions continued
Latch Opened
CONNECTOR PIN
Adventure System
Product Code:
Latch Partially Closed - INCORRECT
LOCK LATCHES
BEFORE EVERY USE
www.rolaproducts.com
Page 8 of 27
59109 / 59110
(T258) 112816
10-18-05 Rev A
Tabla de contenido
loading

Este manual también es adecuado para:

5910959110

Tabla de contenido