Dometic DSP-EM Manual De Mantenimiento página 8

Service codes
Service code
S-22 Generator mode
S-23 UPS function
S-24 UPS timer
S-25 AC high-voltage
shutdown
S-26 Upper AC restart
voltage
S-27 AC low voltage
shutdown
S-28 lower AC restart
voltage
S-29 Program version
number
S-30 Battery charging
status switch off
S-31 Charging status
advance warning
sensitivity
S-32 Standby timer display
S-33 Display self-test
S-34 Display program ver-
sion number
S-35 Factory settings
8
Description
Switches the generator mode of the
DSP-C inverter ON/OFF.
Switches the uninterrupted power
supply ON/OFF.
Sets the duration in which the inverter
supplies the end device with power if
the inverter is no longer supplied with
AC power.
Sets the upper voltage value at which
the inverter switches off.
Sets the voltage at which the inverter
switches on again after a high-voltage
shutdown.
Sets the lower voltage value at which the
inverter switches off.
Sets the voltage at which the inverter
switches on again after a low-voltage
shutdown.
–
Sets the battery charging status at which
the inverter switches off.
Sets the percentage from which an
imminent switch off is displayed.
Sets the time after which the display
switches to standby mode if no entries
are made.
All symbols illuminate.
Program version number
Resets the settings back to the standard
values.
Stand
Range ard
value
ON, OFF ON
ON, OFF OFF
OFF, 0.5 min to 30 min OFF
in 0.5 min intervals
250 V to 280 V 270 V
in 2 V intervals
no recovery, 250 V
220 V to 278 V
in 2 V intervals
180 V to 210 V 180 V
in 2 V intervals
no recovery, 220 V
182 V to 240 V
in 2 V intervals
Program version number –
OFF, 10 % to 60 % OFF
in 5 % intervals
5 % to 15 % 10 %
in 5 % intervals
OFF, 1 min to 10 min 1 min
in 1 min intervals
ON/OFF OFF
– –
ON/OFF OFF
DSP-EM
Device
DSP-C
DSP-T, DSP-C
DSP-T, DSP-C
DSP-C
DSP-C
DSP-C
DSP-C
DSP-C
IBS and IBS
multiplexer
IBS and IBS
multiplexer
Display
Display
Display
DSP-T, DSP-C
EN