Connect Ductwork - Broan Elite E12000 Serie Manual Del Usuario

CONNECT DUCTWORK

(DUCTED HOODS ONLY)
1. Install the discharge collar into the duct
connector of the range hood. Fig. 7
2. Use 6" round metal duct to connect the
discharge collar on the hood to the
ductwork above. See Fig. 8
3. Use duct tape to make all joints secure
and air tight.
4. Insert the unit plug into the power outlet.
NON-DUCTED
RECIRCULATION FILTER
INSTALLATION
(NON-DUCTED HOODS ONLY)
1. Position the filters over the blower.
2. Rotate to lock filters in place.
3. Purchase replacement filter packs
(contains 2) from your dealer.
Part No. B03300495.
FIGURE 7
FIGURE 8
Ø 6"
ROUND
METAL
DUCT
FIGURE 9
- 8 -
DISCHARGE
COLLAR
DUCT
CONNECTOR
CHARCOAL
FILTERS