Connect Ductwork - Broan beot K7388 Manual Del Usuario

CONNECT DUCTWORK

Ducted Configuration
1. Adjust the width of the flue mounting
bracket to equal the inside width of
decorative flue. Insert and tighten
mounting screws to hold bracket width.
2. Use mounting screws and drywall
anchors to secure flue mounting bracket
to the ceiling as shown.
3. Use 6" round metal duct to connect the
duct collar on the hood to the ductwork
above.
4. Use duct tape to make all joints secure
and air tight.
5. Gently place the decorative flues on the
hood in such a way that the fins on the
hood remain inside the flue.
6. Extend the upper flue to the ceiling and
secure with the 2 mounting screws.
DECORATIVE
FLUE
DUCT TAPE
6" ROUND
METAL DUCT
- 7 -
MOUNTING SCREWS
=
=
FLUE MOUNTING
BRACKET
FASTEN FLUE TO
UPPER BRACKET
WITH MOUNTING SCREWS
MOUNTING
SCREWS