Suzuki 34200-96L2 Serie Manual De Instalación página 3

In "Safety Precautions", important precautions are described to prevent danger to the
SAFETY
operator of this gauge or other persons, or damage to the gauge or boat.
PRECAU-
TIONS Precautions for Handling The Gauge Assembly
Do not disassemble or modify the gauge, otherwise you may get an electric
shock, or even the cause of a fire or injury.
Ask for repairs from the authorized SUZUKI Marine Dealer.
• Use navigation information, such as Distance and Fuel Consumption indicat-
ed on this gauge as a general reference only.
When exact navigation information is required, use nautical charts and dedi-
cated navigation instruments.
• Do not operate this gauge while steering the boat or you might cause a mari-
time accident.
When using this gauge while the boat is stopped, check around the boat to
be sure it is safe.
• Do not use the power source other than the specified one.
Doing so might cause heating, inflammation or failure.
• Before installation, take care not to splash water on the back side of the
gauge.
After installation, it is still only water resistant and not completely waterproof
if completely submerged in water.
Take care not to dip this gauge in water.
• Do not to apply excessive force to the display face for it may be damaged if it
is exposed to such force.
• To clean the display face use a piece of soft cloth and lightly wiping the dis-
play face.

WARNING

CAUTION
NOTICE
3