Controlling The Light With Bluetooth ® Wireless Technology - Commercial Electric 53191101 Manual De Uso Y Cuidado

Controlling the Light with Bluetooth
1
Download the Commercial
Electric™ Lighting app
□ From your smart device's App Store, download
the Commercial Electric™ Lighting app to your
smart device.
3
Controlling your LED downlight
□ Now that the downlight is paired with your Bluetooth
wireless technology enabled device, you can directly
control the light whenever it is in range.
nOTiCe: Bluetooth enabled smart devices
typically have a range of approximately 33 ft. (10 m).
Attempting to pair your smart device to the downlight
beyond the intended range can result in inconsistent
performance or failure to connect.
wireless technology
®
2
Connecting to a Bluetooth
technology enabled device
□ Turn on your LED downlight.
□ Enable Bluetooth on your smart device.
□ open the Commercial Electric™ Lighting app, wait for the smart
device to detect the downlight, and select the downlight to pair
the device to the light. The light will blink four times if pairing is
successful.
nOTiCe: If using a dimmer with this light, for best results
set your dimmer at the highest setting.
nOTiCe: Reset your light if the pairing is taking longer than
expected. Turn off your light for 3 seconds, then turn it back
on for 3 seconds. Repeat these steps five times. The light
will blink and then is ready for connecting to the Commercial
Electric™ Lighting app.
8
wireless
®