Commercial Electric 55704141 Manual De Instalación

Package contents
Part Description
A Shop Light
HarDware IncluDeD
Part Description
AA Electrical Plug Adapter
BB End-to-End Connector
CC End Cap
DD 5 ft. Power Cord/Linking Cable
EE Mounting Chain with S Hook
FF Cable Tie
NOTE: Keep your receipt and these instructions for proof of purchase.
WARNING: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before removing an existing light fixture or installing the new one.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
InstallatIon PreParatIon
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture before
drilling, based on the type of ceiling.
NOTE: Separate mounting hardware (not included) not shown to actual size.
NOTE: Eye hooks can be used as an alternate method of attaching the
fixture to the ceiling.
1. Mark two spots on the ceiling 37.4 in. (950mm) apart for suspension mounting
before the installation.
NOTE: If using eye hooks in the ceiling instead, two optional S hooks are provided for hanging the fixture.
MOunTIng TO A DRywALL CEILIng:
a. Drill a 1/4 in. hole in the ceiling to clear the closed
flaps of the toggle bolt (not included).
b. Make sure to fasten the toggle bolt into the butterfly
nut before inserting the flaps into the ceiling.
c. Tighten the toggle bolt.
2. Hang the shop light by placing one chain (EE)
over each hook (not included) that has been
installed on the ceiling. Adjust chains to level light.
The fixture must hang at least 3 in. from the ceiling.
hook
(not included)
UsE ANd CARE GUIdE
4fT HIGH OUTpUT sHOplIGHT
Quantity
1
Quantity
1
1
1
1
2
1
EE
AA
DD
MOunTIng TO A wOOD CEILIng:
a. Drill a 1/16 in. diameter pilot hole in the ceiling.
Make sure to fasten the combo wood-machine
end into the metal hook.
b. Tighten the hook screw (not included) into the wood.
3. Attach Mounting Chain with S Hook (EE) to the
hanger on the shop light (A). Repeat this step on the
other side of the fixture. Then close all hooks with
pliers to secure them.
Hanger
A
1
Item # 1000000000
Model # 55704141
A
BB CC
EE FF
EE