Installation; Mounting The Light Fixture - Commercial Electric 53301212 Manual De Uso Y Cuidado

Installation

WarnInG: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off
the circuit breaker before removing the existing light fixture or installing the new one.
With power disconnected to the electrical box, remove the existing fixture. Make a sketch of how the current
fixture is wired (by wire color) or mark the wires with masking tape and a pencil so you will know how to properly
reconnect the wires to the new LED light fixture.
nOTe: Recommended installation height is 3.9 ft. or above.
1
Attaching the mounting screws
to the wall
For new installation:
□
Mark the hole locations on the wall using the
included template (CC).
□
Drill 1/4 in. diameter pilot holes at the marked
locations, ensuring that the two screw positions at
the bottom are level with each other.
For replacement installation or for new installation:
□
Install a drywall anchor (EE) and a hexagon socket
mounting screws (BB) in each bottom holes, leaving
about 3/8 in. space under the head.
nOTe: Hardware included is for mounting to wood surfaces
only. Ensure that the fixture is mounted onto a structurally
sound surface that will support the fixture.
2
Preparing the fixture for
mounting
□
Remove the wire cover from the fixture
arm on the area light (A) using a
wrench (not included).
□
Put the wire cover screws aside until
ready for reassembly in a later step.
A
Wrench
Mounting
bracket
Wire cover
Wire cover
screws
3

Mounting the light fixture

□
Slide the mounting bracket on the fixture arm of the
area light (A) onto the two bottom hexagon socket
mounting screws (BB) inserted in the wall.
□
Install the third hexagon socket mounting screw
(BB) at the top of the mounting bracket and tighten
securely using a wrench (not included).
□
Tighten the two hexagon socket mounting screws
(BB) at the bottom of the mounting bracket on the
fixture arm with a wrench (not included).
Wrench
A
4
Mounting
bracket