‐ Tempo di ricarica: circa 3.5 ore
Caricabatteria
‐ Tensione di alimentazione di rete:
‐ Frequenza:
‐ Temperatura di esercizio
‐ Temperatura di immagazzinamento
‐ Indicatore LED rosso indica la batteria in ricarica, verde la batteria carica.
Maschere TR 82 – TR 2002
Conformi alla norma EN 136:98. Vedi specifiche istruzioni allegate al prodotto.
Caschi/Cappucci CFU Casco con visiera, FU Visiera leggera, H Cappuccio Tyvek® F
Conformi alle norme EN 166 ed EN 397 (solo per il modello CFU Casco con visiera). Vedi specifiche istruzioni allegate al prodotto.
8. DATA DI FABBRICAZIONE E MARCATURA
Il marchio CE, seguito dall'identificativo 0426 dell'Organismo Notificato (Italcert S.r.l., Viale Sarca, 336 ‐ 20126
Milano), che ha eseguito le prove di tipo per la certificazione CE e che esegue il controllo di produzione art.11.B D.E.
89/686/CEE, si trova sull'etichetta posta sul fondo del TURBINE 170 (esempio A). Sulla stessa etichetta sono riportati
i dispositivi di cui il TURBINE 170 fa parte, i rispettivi riferimenti di norma ed un numero di serie (SN) così composto:
mm (mese di produzione) / aaaa (anno di produzione) – T‐nnn (numero progressivo di serie)
Sul gruppo batteria è apposta un'etichetta (esempio B) con il numero di codice e la data di fabbricazione.
Gli esempi C riportano le etichette dei filtri 100 P3 R, 202 A2B2E2P3 R e 202 A2B2P3 R.
Sul tubo di respirazione è riportato l'anno di produzione.
WARNING
Only strict observance of the rules contained in this manual can guarantee proper functioning and a safe use of the
TURBINE 170 filter fans. SPASCIANI SPA does not assume any responsibility for any damage that may occur following
the incorrect or inappropriate use of the TURBINE 170 filter fans, nor for maintenance or repair operations that are
not carried out within the company's premises or by other organisations as expressly approved by the company
itself. Please note that the breathing protection apparatus should be used by specially trained personnel and under
the supervision and responsibility of persons who are perfectly aware of the limits of application and of the
legislation in force.
The use of non‐original accessories or parts is prohibited and will void the warranty for the breathing apparatus.
1. INTRODUCTION
The TURBINE 170 is a filtering device that protects the respiratory tract. The ventilation unit which is carried on the
belt takes in air through a filter and expels it (filtered) through a pipe into a hood, a helmet or a mask. The flow of
filtered air creates a positive pressure inside the hood/helmet/mask and impedes the entry of external
contaminated air into the operator's breathing area.
The continuous flow of air facilitates breathing and impedes the visor from steaming up, therefore ensuring
maximum comfort for the operator. In order to obtain maximum protection it is necessary to choose the correct
combination of the TURBINE 170 ventilation set, with filter, hood, helmet or mask.
Please consult the following tables for the possible combinations of hood/helmet/mask and for the protection levels
offered by various filters.
2. DESCRIPTION / SCOPE OF APPLICATION
The TURBINE 170 is made up of the following components:
‐ TURBINE 170 ventilation unit
Made up of a plastic container which contains a fan, an electric motor and a battery pack. At the bottom of the unit
there are two air inlets, threaded to secure the filters. A cylinder at the top allows air to escape; it is threaded
internally to secure the breathing tube. There are two lateral loops for connection of the back brace. At the top
there is a power switch and 4 LEDs which indicate the status of the battery and flow.
‐ Belt with renal cushion
The belt, in extinguishing tape with nylon clasps, passes through the two rings which can be found on the body of the
ventilation unit. This has a renal cushion, so that the device can be worn in a more secure and comfortable way.
Alternatively it can be supplied a transparent PVC belt.
100‐240Vac
50‐60 Hz
‐10 +50°C
‐40 +85 °C
EN USER MANUAL
6 / 20