Controlling The Rest Of Your System; Setting The Remote To Control Other Components; Selecting Preset Codes Directly - Pioneer VSX-920 Manual De Instrucciones

Controlling the rest of your system

Chapter 9:
Controlling the rest of your
system
Setting the remote to control
other components
Most components can be assigned to one of
the MULTI CONTROL buttons using the
component's manufacturer preset code stored
in the remote.
However, please note that there are cases
where only certain functions may be
controllable after assigning the proper preset
code, or the codes for the manufacturer in the
remote control will not work for the model that
1
you are using.
Note
• You can cancel or exit any of the steps by
RECEIVER
pressing
• After one minute of inactivity, the remote
automatically exits the operation.
Note
1 TV CONTROL buttons are only dedicated to control the TV
.

Selecting preset codes directly

RECEIVER
INPUT SELECT
INPUT
BD DVD TV
CH
DVR CD CD-R
ADAPTER iPod USB VIDEO
1 While pressing the
press and hold the '1' button for three
seconds.
2 Press the MULTI CONTROL button for
the component you want to control.
The component can be assigned to the BD,
DVD, TV, DVR, CD, CD-R or VIDEO button.
• When assigning preset codes to TV
CONTROL, press INPUT here.
3 Use the number buttons to enter the
preset code.
You can find the preset codes on page 59.
If the correct code has been input the power of
the component being input will turn on or off.
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
4 Repeat steps 2 through 3 to try a different
code, or to enter a code for another
component you want to control.
5 When you're done, press
(for example, codes for TV, CATV, Satellite TV or DTV)
MEMORY
HDD DVD VCR
1 2 3
DISP
S.RETRIEVER SB CH CH SELECT EQ
4 5 6
CH
PHASE
MIDNIGHT SPEAKERS LEV
7 8 9
CH
SHIFT
DIMMER LEV
0
CLR ENTER
+
/ 10
RECEIVER button,
RECEIVER .
.
09
55
En