Remote Control Operation; Pairing The Bluetooth Adapter And Bluetooth Wireless Technology Device; Listening To Music Contents Of Bluetooth Wireless Technology Device With Your System - Pioneer VSX-521-k Manual De Instrucciones

Basic playback
Important
• Pioneer does not guarantee proper connection and
operation of this unit with all Bluetooth wireless
technology enabled devices.

Remote control operation

The remote control supplied with this unit allows you to play
and stop media, and perform other operations.
• It must be necessary that the Bluetooth wireless
technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all
Bluetooth wireless technology enabled devices.
Pairing the Bluetooth ADAPTER and Bluetooth
wireless technology device
"Pairing" must be done before you start playback of Bluetooth
wireless technology content using Bluetooth ADAPTER.
Make sure to perform pairing first time you operate the
system or any time pairing data is cleared. "Pairing" is the
step necessary to register Bluetooth wireless technology
device to enable Bluetooth communications. For more
details, see also the operating instructions of your Bluetooth
wireless technology device.
• Pairing is required when you first use Bluetooth wireless
technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be
done with both of your system and Bluetooth wireless
technology device.
• If the Bluetooth wireless technology device's security
code is "0000", there is no need to make the security code
setting on the receiver. Press ADAPTER to switch the
ADAPTER input, then conduct the pairing operation on
the Bluetooth wireless technology device. If pairing is
successful, there is no need to performing the pairing
operation below.
• When using the AS-BT200 only: If the Bluetooth wireless
technology device supports SSP (Secure Simple Pairing),
there is no need to make the security code setting. Press
ADAPTER to switch the ADAPTER input, then conduct
the pairing operation on the Bluetooth wireless
technology device. If pairing is successful, there is no
need to performing the pairing operation below.
1
Press TOP MENU.
2
Press ENTER to enter PAIRING.
3
Select the PIN code to be used from 0000/1234/8888
using /, then press ENTER.
PAIRING blinks.
• You can use any of 0000/1234/8888 PIN codes. Bluetooth
wireless technology device using any other PIN code
cannot be used with this system.
4
Switch on the Bluetooth wireless technology device
that you want to make pairing, place it near the system and
set it into the pairing mode.
5
Check to see that the Bluetooth ADAPTER is detected by
the Bluetooth wireless technology device.
When Bluetooth wireless technology device is connected:
Bluetooth wireless technology device name appears in the
receiver display.
• The system can display alphanumeric characters only.
Other characters may not be displayed correctly.
When Bluetooth wireless technology device is not connected:
NODEVICE appears in the receiver display. In this case,
perform the connection operation from the side of the
Bluetooth wireless technology device.
6
Bluetooth wireless technology device list,
From the
Bluetooth ADAPTER and enter the PIN code selected
select
in the step 4.
• PIN code may in some case be referred to as PASSKEY.
Listening to Music Contents of Bluetooth wireless
technology device with Your System
1
Press ADAPTER to switch the receiver to ADAPTER
input.
The ADAPTER input can also be selected by pressing
SOUND RETRIEVER AIR on the front panel. In this case, S.R
AIR, the optimum listening mode, is selected automatically.
2
Perform the connection operation from the side of the
Bluetooth wireless technology device to the Bluetooth
ADAPTER.
• When the Bluetooth ADAPTER is not plugged into the
ADAPTER PORT terminal, NO ADAPTER will be
displayed if ADAPTER input is selected.
3
Start playback of music contents stored in
wireless technology device.
This receiver's remote control buttons can be used for basic
playback of files stored on the Bluetooth wireless technology
device.
• Bluetooth wireless technology device should be
compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you
use, operation may differ from what is shown in the
remote control buttons.
MUTE
BASS TRE
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Pioneer Corporation is under license. Other
trademarks and trade names are those of their respective
owners.
04
04
Bluetooth
23
En