La-Z-Time
Motion Upholstery &
®
La-Z-Time Motion-Modulars
Tension Adjustment Instructions
WARNING
– To reduce the risk of injury:
• Use of this product requires adequate strength to bring the back upright and close the
legrest. Selecting the maximum tension settings could make bringing the back upright
and closing the legrest difficult.
Legrest Tension Adjustment Instructions
1. Stand beside the unoccupied unit and pull the release handle to extend the legrest. Make sure not
to lean or put pressure on the extended legrest, as it will close. From under the legrest, lift the
mechanism cover to access the tension adjustment wheels. The wheels are located toward the front
of the mechanism, one on each side (F
2. The legrest tension adjustment wheels are factory set in the center position (F
position provides average legrest tension and support.
3. A taller or heavier person may choose to increase the amount of legrest tension for added leg
support. To increase the amount of legrest tension, turn the adustment wheels up and toward the
front of the recliner (F
3). Both legrest tension adjustment wheels must be set in the same position.
IGURE
4. A smaller person may choose to decrease the amount of legrest tension for easier closing of the
legrest. To decrease the amount of legrest tension, turn the adustment wheels down and toward the
back of the recliner (F
4). Both legrest tension adjustment wheels must be set in the same position.
IGURE
5. Close the legrest. Test the new legrest tension setting and make adjustments if needed.
6. Repeat these instructions to customize each reclining seat in your motion sofa or modular group.
14
Legrest
®
1). Each wheel has three adjustment settings.
IGURE
IGURE
La-Z-Time Motion-Modulars
F
IGURE
2). The center
Adjustment wheel location, one on each side
F
3
IGURE
Maximum legrest tension
La-Z-Time
Motion Upholstery &
®
Tension Adjustment Instructions
1
Legrest
®
Legrest
Tension
Adjustment
Wheel
F
2
IGURE
Average legrest tension
F
4
IGURE
Minimum legrest tension
15