Reclina-Way
Glide Adjustment Instructions
WARNING
– To reduce the risk of serious injury:
• Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
Adjusting the Glides
Make sure the glides are adjusted to a height that provides a clear path for operation of the legrest.
Each glide is attached to the base rail by one jam nut and one lock washer on top of the base rail,
and one jam nut on the bottom of the base rail.
1. To extend the glide, loosen the upper jam nut by rotating clockwise. Turn the lower
jam nut clockwise to the desired height.
2. Tighten the upper jam nut by rotating counterclockwise.
3. Repeat steps one and two for each adjustable glide on the unit, if needed.
4. Repeat this procedure, as necessary, to level the sofa.
Base Rail
6
Motion Sofa
®
Upper Jam Nut
Lower Jam Nut
Adjustable Glide
Lock
Washer
Reclina-Way
3-Position Legrest Operating Instructions
WARNING
-- To reduce the risk of serious injury:
•
Provide a clear path for operation of the back and legrest. Place tables and area rugs
at a distance to allow the legrest to fully extend without rubbing or interference.
•
To safely exit the unit and prevent a tripping hazard, bring the back upright
and close the legrest.
NOTICE
– To prevent product damage:
• Damage will occur to the mechanism if the legrest is forced closed from the 1st or
2nd position. The legrest must be extended to the 3rd position and then closed.
To Operate the Legrest
1. Your Reclina-Way
®
motion sofa is equipped with a three-position locking legrest for customized
seating comfort. Simply pull on the handle rotating it counterclockwise to control the legrest
(F
1). You may stop in any one of three ideal positions. The 1st position is slightly inclined
IGURE
for relaxing reading (F
2). The 2nd position is slightly more inclined for comfortable
IGURE
television viewing (F
3). The 3rd position is fully extended for complete relaxation (F
IGURE
To lower the legrest, rotate the handle counterclockwise to the fully extended position, then
rotate clockwise to the fully closed position.
2. The sofa back can be reclined with the legrest closed or extended. To recline, apply pressure
to the back. Sit upright to return the back to an upright position.
3. Bring the back upright and close the legrest before getting out of the unit.
F
1
IGURE
CLOSED
POSITION
F
3
IGURE
2ND POSITION
Motion Sofa
®
F
2
IGURE
1ST POSITION
F
4
IGURE
3RD POSITION
4).
IGURE
7