Ewbank FP1000 Instrucciones De Uso Y Cuidado página 5

EB0491-FP1000-10.13_Layout 1 31/10/2013 11:11 Page 5
Assembling the Appliance
• Insert the handle into the aperture at the top
of the body until the metal securing knob is
located (Fig.3).
• Adjust the handle to suit your height (Fig.1).
• Polisher base can be removed from the
appliance, press release clip (A) and pull
straight out (Fig.2).
Changing the pads and plates on your
product
• Make sure machine is not plugged in before
fitting pads.
• Note the orientation of the drive hubs (Fig.4).
• Place the required hook & looped-plate or
brush plateover the hub and rotate
until the shape lines up (Fig.5).
• Press the plate down to clip into place (Fig.6).
• Always use two plates of the same type, i.e.
not 1 brush and 1 pad (Fig.7).
• Simply pull the plates off to remove and
change.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6
Fig.7
5