B
Y
EFORE
CAUTION: When using telephone equipment, there are basic safety instructions
that should always be followed. Refer to the IMPORTANT SAFETY
INSTRUCTIONS provided with this product and save them for future reference.
P
C
ARTS
HECKLIST
Make sure your package includes the following items:
N
TI
MESSAGES
PREVIOUS
NEXT
STOP
PLAY
PLAY
2
4
PLAY
3
1
PLAY
Answerer
M
J
ODULAR
You need an RJ11 type modular jack, which is the most common type
of phone jack and might look like the one pictured here installed in
your home. If you don't have a modular jack, call your local phone
company to find out how to get one installed.
I
NSTALLING THE
In the event of a power loss, a 9-volt battery (not included) enables
the answerer to retain greetings and messages stored in memory. To
install the battery:
1. Remove the battery compartment door on the bottom of the unit
by loosening the screw with a Phillips
screwdriver. Lift the door.
2. Connect a fresh 9-volt alkaline battery (not included). The large
and small contacts on the battery clip and the battery will
interlock. Once connected, place the battery inside the battery
compartment.
3. Replace the battery compartment door and tighten the screw.
NOTE: If the battery is low or not installed, the unit announces
"Low Battery" at the end of message playback.
4
B
OU
EGIN
MIC
AC power supply
R
ACK
EQUIREMENTS
B
ATTERY
Telephone line cord
Wall plate
Modular
telephone
line jack
Battery compartment
door
Battery clip
-
+
Battery
-
+