Save Energy - Sears Kenmore Elite 796.4158 Serie Manual De Uso

Lavadora automatica de carga frontal
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SPECIAL FUNCTIONS
CONTROL
LOCK
Cootrd Look _
Use this option to disable the controls. The
washer can only be locked during a cycle. This
feature can prevent children from changing
cycles or operating the machine. Once set, the
controls remain locked and must be turned OFF before the
controls can be used again. Once the washer has shut off,
the power button wifl allow the machine to be turned ON,
but the controls will stiff be locked. When the controls are
locked, "CL" wifl display alternately with the estimated time
remaining.
Pressand hold the STAY FRESHbutton for three seconds to
activate or deactivate the controls.
CLEAN WASHER CYCLE
Clean WasherDetergent residue can build up in the wash
drum over time and can lead to a mildewy or
musty smell. The CLEAN WASHER cycle is
specially designed to remove this buildup
using bleach or another cleaner designed specifically for
cleaning front load washers. Run the CLEAN WASHER cycle
once a month, or more often under heavy use conditions or if
odor is present. See complete instructions in the CARE AND
CLEANING section.
@
@
Turn ON the washer and press and hold the ACCELA-
WASH button for five seconds. Selecting any other cycle
after CLEAN WASHER has been selected will cause the
CLEAN WASHER cycle to be cancelled.
Fill the bleach dispenser to the MAX line with liquid
chlorine bleach. Do not overfill the bleach dispenser.
Overfilling will cause the bleach to dispense immedi-
ately.
NOTE: For other drum cleaning
products, follow
the cleaner manufacturer's
instructions and
recommendations.
For powdered
cleaning products,
add the cleaner to the main wash compartment
of
the dispenser drawer. Place tablet cleaners directly
into the drum.
Press the START/PAUSE button to start the cycle.
After the cycle has ended, secure the door slightly ajar
with the door magnet. This will promote air circulation
and allow the interior of the machine to dry. To use this
feature, close the door just until it contacts the door
magnet.
NOTE: Do NOT use this cycle with clothes, and do
NOT add detergent
or fabric softener.
MY CYCLE
MY CYCLE allows you to store a customized wash
cycle for future use. It allows you to save favorite
temperature, spin speed, soil level, and other
options for a cycle, and then recall them at the touch of a
button.
NOTE: You can only save a setting for one cycle at a
time. Pressing and holding the MY CYCLE button will over-
write any previously saved cycle.
To save a MY CYCLE:
Pressthe POWER button
to
turn on the washer.
Turn the cycle selector knob to select the desired cycle.
Pressthe CYCLE MODIFIER button to adjust the cycle as desired.
Press the CYCLE OPTION
button to add the desired options.
Press and hold the MY CYCLE button for three seconds.
To
@
@
recaff a MY CYCLE:
Press the POWER button to turn on the washer.
Pressthe MY CYCLEbutton. The stored settings will be
displayed.
Press the START/PAUSE button to start the cycle.
NOTE: MY CYCLE can be adjusted
the same as any
other cycle. However, once any other button is pressed,
the LED will turn off indicating
that the settings are no
longer those of your saved cycle. Press and hold the MY
CYCLE button for five seconds to overwrite
the previous
MY CYCLE settings and replace
them with the current
settings.
AUTO SOAK
AutoSoak Use the AUTO SOAK option to presoak
garments to help remove difficult
spots or
stains on fabric.
This option provides a 30
minute presoak prior to the start of the
selected cycle. At the end of the presoak time, the select-
ed cycle will use the same water.
To use the AUTO SOAK feature, press and hold the
STEAM TREAT button for five seconds.
SAVE ENERGY
Save E nergyOThis option saves energy by using cooler water
while increasing the wash and rinse times to
maintain wash performance. This feature is only
_
...................
: available with the NORMAL/CASUAL
and
HEAVY DUTY cycles as listed below.
To use the Save Energy option, press and hold the Pre Wash
button for three seconds.
• NORMAL-
Hot becomes Warm
• NORMAL
- Warm becomes Cold
• HEAVY DUTY - Hot becomes Warm
22
Tabla de contenido
loading

Tabla de contenido