Craftmade Crescent D52 Instrucciones De Instalación página 5

9
Step 9 Step 9
Thread steel cable through cable clasp Thread steel cable through cable clasp
(S13). Loop wire over and thread back (S13). Loop wire over and thread back
through cable clasp, making sure loop is through cable clasp, making sure loop is
large enough to attach on to "J hook large enough to attach on to "J hook
(S10) in outlet box. Tighten screw (S10) in outlet box. Tighten screw
securely to ensure that loop does not securely to ensure that loop does not
come loose. come loose.
10
For added security, attach safety cable from fan unit to "J" hook (S10) in
outlet box. Secure by looping zip tie (S11) through safety cable and "J"
hook. Tighten zip tie securely. Lift fan onto the mounting bracket (#1).
Turn housing until hanging ball seats itself into ball socket (listen for
click).
Green Ground Wire
NOTE: Parts furnished will allow
you to install your fan at up to a
35° angle. Angles greater than 35°
will require a 45° angle adapter
(see dealer). NOTE: J Hook
installation is a Canadian
requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
Cable Clasp (S13)
Step 10
Support Beam
"J" Hook (S10)
Outlet Box (A)
OUTLET BOX
Ceiling
Mounting Bracket (#1)
"J" Hook (S10)
Zip Tie (S11)
Safety Cable
11
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S6) are provided for
your convenience. If an additional blue wire is present then also connect
the blue wire to the black wire. (Optional light kit may be wired to
individual wall switches, if desired.)
2. After connections
Ground
are made, turn
splices upward
White (Neutral)
and push carefully
into outlet box.
Black (Power)
Separate blue and
black wires on one
side of the box, and
white and green wires
on the other side.
There are 4 colored
wires coming from the
top of the motor
(including ground wire).
Wire Connnections
Outlet Box Fan wires
Black Black
(Hot wire for fan)
Green Green
(Ground wire)
White White
(Neutral wire)
Black Blue
(Light kit wire)
Step 11
White
Black
Blue
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
Wire
Connectors
(S6)
Ground
(Green)